Nortel Networks Remote Gateway 50 - Manual (Page 90)

Page 90 of 258 Bandwidth Management
553-3001-207 Standard 2.00 January 2006
Sample outputs for PRT commands
Figure 16 on page 91 shows an example of the output of the PRT
INTRAZONE command. Figure 17 on page 92 shows an example of the
output of the PRT INTERZONE command.
PRT ZCAC []
Print CAC parameters for the specified zone, or for all zones, where:
• zone = ALL or 0-255
The output of this command displays the following information:
• Local ZONE = 0-255
• State = ENL/DIS
• CR = 1-100
• CPL = 1-100
• CD = 1-100
• CJ = 1-100
• CQOS = 1-100
• ZQRT = 1-100
• ZQRTI = 10-120
• ZQUAT = 1-99
• ZQWAT =1-99
• CACVT = 1-255
LD 117 — Display Adaptive Network Bandwidth Management information
(Part 3 of 3)
Command Description