Nortel Networks Remote Gateway 50 - Manual (Page 86)

Page 86 of 258 Bandwidth Management
553-3001-207 Standard 2.00 January 2006
2 Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page opens, as shown in
Figure 7 on
page 64 . This page lists all the configured zones and their
intrazone statistics by default.
3 Select Print Adaptive Network Bandwidth Management and CAC
Parameters (PRT ZCAC) from the Action drop-down list.
4 Select a zone from the Zone Number drop-down list, by doing one of the
following:
• Select ALL to print statistics for all zones.
• Select a specific zone number to display statistics for a specific zone.
5 Click Submit.
The Maintenance Commands for Zones web page reopens, displaying
the statistics for the specified zone or zones. A blank field indicates that
that statistic is either not available or not applicable to that zone.
Figure 15 on page 87 shows an example of the CAC parameters for
sample Zone 3.