Nortel Networks Remote Gateway 50 - Manual (Page 80)

Page 80 of 258 Bandwidth Management
553-3001-207 Standard 2.00 January 2006
Configuration using Command Line Interface
You can also configure the Adaptive Network Bandwidth Management
feature using LD 117.
LD 117 — Configure Adaptive Network Bandwidth Management. (Part 1 of 6)
Command Description
CHG CACVT
Configure the zone-to-zone record validity time interval, where:
• Zone = 1-255
• Interval = 1-(48)-255
CHG CD
Change the Cd coefficient in the formula that determines how quickly an alarm
reduces the Sliding Maximum bandwidth for the identified zone, where:
• Zone = 1-255
• Cd = Cd coefficient = 1-(50)-100
CHG CPL
Change the Cpl coefficient in the formula that determines how quickly an
alarm reduces the Sliding Maximum bandwidth for the identified zone, where:
• Zone = 1-255
• Cpl = Cpl coefficient = 1-(50)-100
CHG CJ
Change the Cj coefficient in the formula that determines how quickly an alarm
reduces the Sliding Maximum bandwidth for the identified zone, where:
• Zone = 1-255
• Jitter = Jitter coefficient = 1-(50)-100