Nortel Networks Remote Gateway 50 - Manual (Page 85)

Bandwidth Management Page 85 of 258
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
Maintenance commands
The Adaptive Network Bandwidth Management feature can be maintained
using Element Manager or LD 117.
Maintenance using Element Manager
The CAC parameters, intrazone statistics, and interzone statistics for one of
more zones are available in Element Manager from the Zones web page,
shown in Figure 6 on
page 61 . To view the intrazone or interzone statistics,
use Procedure 3 on page 63 . To display the CAC parameters, follow the steps
in Procedure 4.
Procedure 4
Displaying CAC parameters for one or more zones
1 Select IP Telephony > Zones from the navigator.
The Zones web page opens (see Figure 6 on page 61 ).
DIS ZCAC
Disables the Call Admission Control (CAC) feature for the specified zone,
where:
• Zone = 1-255
Note: Disables the feature on a zone-by-zone basis.
ENL ZCAC
Enables the Call Admission Control (CAC) feature for the specified zone,
where:
• Zone = 1-255
Note: Enables the feature on a zone-by-zone basis.
LD 117 — Configure Adaptive Network Bandwidth Management. (Part 6 of 6)
Command Description