Nortel Networks Remote Gateway 50 - Manual (Page 190)

Page 190 of 258 Dialing Plan configuration
553-3001-207 Standard 2.00 January 2006
INST
CTYP LOC Set according to associated SPN pattern
REQ NEW
CUST 0
FEAT RLB
RLI 18
ENTR 0
LTER NO
ROUT 18
...
DMI 18
...
2 Configure ESN Special Number and Digit Manipulation.
LD 90 – Configure ESN Special Number and Digit Manipulation. (Part 1 of 2)
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15
FEAT NET Network translation tables
TRAN AC1 Translator – Access Code 1 (NARS/BARS)
Because the call is incoming to the branch office, AC1 is
triggered if INAC = YES in the Route Data Block for the
Virtual Trunk in LD 16 and the INTL call type is associated
with AC1 in NET_DATA of the Customer Data Block in
LD 15.
TYPE SPN Special code translation data block
SPN x...x Special Number translation
Enter the SPN digits in groups of 3 or 4 digits, separated by
a space (for example, xxxx xxx xxxx). The SPN can be up to
19 digits long.
The maximum number of groups allowed is 5.