Nortel Networks Remote Gateway 50 - Manual (Page 42)

Page 42 of 258 Setting up the main office
553-3001-207 Standard 2.00 January 2006
Note: The branch office zone number and zone bandwidth management
parameters at the main office must match the corresponding branch office
zone number and zone bandwidth management parameters at the branch
office.
3 Define the zone parameters for the branch office. Use LD 117 or Element
Manager. Refer to IP Peer Networking: Installation and Configuration
(553-3001-213).
IMPORTANT!
Zone 0, the default zone, must not be configured as a branch office
zone. Network Bandwidth Management does not support zone 0. If
zone 0 is configured as an branch office zone, the Bandwidth
Management feature is not activated.
LD 117 – Define zone parameters for the branch office.
Command Description
CHG ZBRN
Define a zone as a branch office zone.
CHG ZDST
If the branch office observes Daylight Savings Time (DST), these
parameters specify the start and end of DST. During DST, the clock
automatically advances one hour forward.
CHG ZTDF
Specified in minutes, the time difference between main office and branch
office when both are not in DST.
CHG ZDES
A name to render data display more meaningful.