Enabling codecs – Nortel Networks Remote Gateway 50 User Manual
Page 58
Page 58 of 258
Bandwidth Management
553-3001-207 Standard 2.00 January 2006
3
Choose unique Bandwidth Zone numbers for the Virtual Trunks in the
network.
4
Choose the codecs that will be enabled on each Call Server.
5
Identify what the interzone codec strategy will be (BB-Best Bandwidth
or BQ-Best Quality) for each zone in the network.
6
Identify what the intrazone codec strategy will be (BB-Best Bandwidth
or BQ-Best Quality) for each zone in the network.
7
Calculate the bandwidth available for intrazone calls for each zone in the
network.
8
Calculate the bandwidth available for interzone calls for each zone in the
network.
9
Calculate the bandwidth available for intrazone calls
Enabling codecs
In Element Manager, select the codecs that will be enabled for calls on the
Call Server, and define the associated parameters, such as payload size. Select
the zone on the Zones web page (see Figure 6 on
) and click VGW
and IP phone codec profile. Select an existing codec or configure a new one
in the VGW and IP phone codec profile section, shown in Figure 5 on
. Refer to IP Peer Networking: Installation and Configuration
(553-3001-213) for full instructions on configuring a codec.