Nortel Networks Remote Gateway 50 User Manual
Page 127

Page 127 of 258
Main Office Configuration for Survivable Remote Gateway 50
Configuration Guide
166
Alternative Call Routing for Network
Bandwidth Management
Contents
This section contains information on the following topics:
Operating parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature interactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feature implementation using Command Line Interface . . . . . . . . . . .
Feature implementation using Element Manager . . . . . . . . . . . . . . . . .
Feature operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description
Alternative Call Routing for Network Bandwidth Management (NBWM)
allows a station-to-station call (that is, a call that does not use a trunk)
between a branch office and main office to overflow to traditional routes.
Overflow can occur if there is insufficient inter-zone bandwidth available to
carry the call or if the Quality of Service (QoS) has degraded to unacceptable
levels. The feature also applies to station-to-station calls from one branch
office to another branch office, provided both stations are registered to the
same main office.