Nortel Networks Remote Gateway 50 - Manual (Page 82)

Page 82 of 258 Bandwidth Management
553-3001-207 Standard 2.00 January 2006
CHG ZONE
[ ]
Change the parameters of an existing zone, where:
• zoneNumber = 1-255
• intraZoneBandwidth = 1000000 (Mbit/s)
• intraZoneStrategy = intrazone preferred strategy
— Best Quality = BQ
— Best Bandwidth = BB
• interZoneBandwidth = 1000000 (Mbit/s)
• interZoneStrategy = intrazone preferred strategy
— Best Quality = BQ
— Best Bandwidth = BB
• zoneIntent = type of zone, where:
— MO = Main Office zone
— BMG = Branch Media Gateway (branch office) zone
— VTRK = Virtual Trunk zone
• zoneResourceType = resource intrazone preferred strategy
— shared DSP channels (default) = shared
— private DSP channels = private
Note: In CS 1000 Release 4.5, the zones that were described with BMG
designator stay with BMG one, all the other zones are provided with MO
designator. It is possible to update ZoneIntent using the CHG ZONE
command.
CHG ZQRT
Change ZQRT, which is Response time increase by percentage. It is used to
determine the increase to the Sliding Maximum for the identified zone, where:
• Zone = 1-255
• Incr = increase value in percentage = 1-(10)-100
LD 117 — Configure Adaptive Network Bandwidth Management. (Part 3 of 6)
Command Description