Nielsen-Kellerman ClearNav - Manual (Page 35)

NK ClearNav Manual • Version 0.5 • July 3, 2008
Page 35 of 86
4.1.1 Zoom In (+) Button
The Zoom In (+) button is used to increase the zoom level of the moving map display. After zooming in
you will see less of the moving map but will see it in more detail. To keep straight which zoom button
to use ‐ think of the Zoom In (+) button as pushing the glider’s control stick forward to dive down closer
to the earth. Since the Zoom In (+) button is located on the forward/top side of the remote – it makes
sense – just push the forward button as if you were pushing the stick forward to get closer to the
earth.
The rectangular Selection Box in the middle of the moving map display shows the current zoom level.
The scale number shown is the width of the rectangle. In the screen capture below (left) the scale
rectangle in the middle of the map is 20 miles wide. If you were to press the Zoom In (+) button once
you would zoom in on the map and the number in the rectangle would be 10 miles.
Tip: When incrementing or decrementing numbers with the Up and Down buttons, the Zoom In
(+) and Zoom Out (‐) buttons can be used to increment or decrement the value in larger steps.