Nielsen-Kellerman ClearNav - Manual (Page 23)

NK ClearNav Manual • Version 0.5 • July 3, 2008
Page 23 of 86
2.1.7 ClearNav DB15 Extension
The ClearNav DB15 Extension cable is designed to connect a ClearNav display on a RAM mount to the
Nexus Wiring Board that is installed behind the panel. The cable is a custom 14‐conductor 2' cable with
low‐profile DB15 female connector. The cable is extremely flexible and has an abrasion resistant jacket.
The cable is run through a 3/8" (1 cm) hole in panel and connected to a screw‐terminal on the Nexus
Wiring Board. The conductors are pre‐stripped and tinned. A rubber grommet is included on the cable
for use in the panel hole. A wiring diagram is included.