Nortel Networks Companion MICS-XC - Manual (Page 75)

Programming / 69
P0881594 Issue 01 MICS-XC Norstar-Companion Installer Guide
The Software keys can be obtained and entered using the
following steps.
Step 1: Obtain the Companion ID
The Companion ID Label is sent to each customer once radio
credits have been purchased. In order to implement the credits
and take advantage of the Norstar Companion capability, you
must obtain two sets of keys. One is the Credit Key and the
other is the UTAM Activation Key. The keys are available by
calling the Nortel Customer Response Center. You must
provide the following information as shown on the
Companion ID label:
• your Companion ID number
• the zip code
• the number of radio credits already purchased (if
applicable)
Step 2: Obtain the System Identification Number
Obtain the System ID (SysID) by pressing
ƒ••НБНИО, or
ƒ••‡·‡›‹ on any M7324 or M7310
telephone display.
This information is also available by accessing Software
keys in an Installer programming session:
1. Place the programming overlay on an M7310 or M7324
telephone.
2. Press
ƒ••Ç؈ÏÈÌ. The display
reads Password:.
3. Enter the most recent Installer password. The display reads
Terminals&Sets.
4. Press
‘ until the display reads Software keys.
p0881594.book Page 69 Tuesday, August 25, 1998 3:59 PM