Nortel Networks Companion MICS-XC - Manual (Page 42)

36 / Installation
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01
Sliding cover onto bracket
Installing portable telephones
To use Norstar Companion portables, you must first install
radio Base Stations to transceive radio signals to and from the
portable telephones. See “Installing Base Stations” on
page 31.
Companion Portable Telephones are installed differently than
traditional Norstar sets. There are no direct connections
between the portables and the Norstar system. Do the
following:
• Install the batteries and battery charging units for each
portable, using the instructions that come with the
portable.
• Register each Companion portable for use with the Norstar
system. For complete instructions, see the Registration
information beginning on page 61.
p0881594.book Page 36 Tuesday, August 25, 1998 3:59 PM