Nortel Networks Companion MICS-XC - Manual (Page 60)

54 / Programming
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01
A line number must always be entered as a three-digit number.
Line numbers from 10 to 99 must be entered with a leading
zero (line 020, for example). Similarly, line numbers less than
10 must be entered with two leading zeros (line 002, for
example).
Internal telephone numbers, also referred to as directory
numbers (DNs), can be three to seven digits long. The DN
length can be changed in programming.
Template defaults
This section describes only the defaults that apply to
Companion programming. For all other default settings, refer
to MICS Programming Record.
Note: (U.S. only). Before registering Companion portable
telephones you must first obtain and enter a certain
number of portable credit keys. Also keep in mind,
before the Base Stations can be recognized by the XC
system, you must obtain and enter a UTAM Activation
Key. Please refer to "Software keys (U.S. only)" on
page 68 before setting up your wireless system.
Startup defaults
Passwords defaults
Reg. pswd *
Setting Default
NA-MICS 4.0 template Square
MICS-XC 4.0 template PBX
Start DN 221 (may be different for upgraded systems)
Setting PBX default DID default
Reg. pswd 72346
p0881594.book Page 54 Tuesday, August 25, 1998 3:59 PM