Nortel Networks Companion MICS-XC - Manual (Page 59)

Programming / 53
P0881594 Issue 01 MICS-XC Norstar-Companion Installer Guide
When an ellipsis (…) is at the end of a heading or subheading,
it means you can press
≠ to see the setting for that
heading.
The Norstar Programming Record
The Programming Record provides a convenient way to
record what you have programmed. It also helps you to plan
your programming.
You may photocopy pages from the record as necessary for
programming many telephones or lines.
Exiting programming
Norstar stores your changes automatically as soon as you alter
any settings; you do not need to “save” your changes.
Press
®. The display briefly reads End of session.
Viewing your programming updates
If any of the changes you have made to programming have not
immediately taken effect, you see an UPDATE display button
when you leave programming. The display shows you how
many telephones have not been currently updated due to the
system being busy with other programming or the telephone is
in use.
Press DNs to see the specific sets where programming changes
have not been updated. Items disappear from the list as they
are updated, and UPDATE disappears once all changes are
complete.
Entering numbers
Numbers are entered from the Norstar telephone dial pad. The
backspace display button may be used to edit the number.
p0881594.book Page 53 Tuesday, August 25, 1998 3:59 PM