Nortel Networks Companion MICS-XC - Manual (Page 56)

50 / Programming
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01
Programming overview of XC using the System Coordinator
password
Programming tools
A Norstar telephone
Programming is done at an M7310 or M7324 telephone. Use
the buttons on the telephone to program a setting or to request
a specific programming action. Norstar guides you with step-
by-step instructions on the telephone display while you are
programming.
The programming overlay
The programming overlay is a paper cutout that labels four
telephone buttons used during programming. The
programming overlay is provided at the front of this guide.
Terminals&Sets Lines Passwords
Capabilities Name Call log pswds
Name Services Progrming pswds
User prefernces Ringing service Reg. pswd
Restrictions Restrn service Time&Date
Telco features Routing service System prgrming
Sys speed dial Companion
p0881594.book Page 50 Tuesday, August 25, 1998 3:59 PM