Nortel Networks 8000 Series - Manual (Page 43)

Adding and replacing DC power supplies 43
Installing a DC Power Supply in an Ethernet Routing Switch 8000 Series Chassis
18 Using a Phillips screwdriver, replace the plastic safety cover on the power
supply ( Figure 21 ).
Figure 21 Replacing the plastic safety cover on the DC power supply
19 For the 8010co chassis, replace the bottom front bezel.
For instructions, see “Replacing the bottom bezel (8010co chassis)” on
page 52 .
20 Turn the DC input power source on, or reset the power source circuit breaker,
to provide power to the power supply.
10413FA
-DC
+DC