Nortel Networks 8000 Series - Manual (Page 32)

32 Adding and replacing DC power supplies
313070-E Rev 00
Installing the DC power supply
In addition to the DC power supply and the guide for installing it, your DC power
supply shipment contains several hardware accessories. Verify that the items in
the shipping container match those on the shipment packing list.
Use Table 3 as a checklist to verify the contents of the 8004DC shipping
container.
Use Table 4 on page 33 as a checklist to verify the contents of the 8005DC
shipping container.
Danger: Due to high-energy hazards, only qualified service personnel
are permitted to connect the 8000 Series chassis to the DC power source.
Table 3 DC power supply shipping accessories: 8004DC
Check Accessory Use to
2 two-hole crimp lug
terminals with
attached tubing
(8004) Connect the positive and
negative power inputs.
1 one-hole crimp lug
terminal with attached
tubing Connect the ground stud.
5 nuts Connect all leads.
5 lock washers Connect all leads.
1 washer Connect the ground stud.