Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 35)

- 27 -
5. Press Enter. A screen prompts you to reenter the new password.
F IGURE 4-8 R EENTER N EW P ASSWORD
6. Reenter the new password you typed in step 4 and press Enter. The “Password changed”
message appears, confirming that the new password is in effect.
7. Press Enter to remove the message and return to the General screen. The admin password
appears as asterisks in the admin Password field.
Note: If the confirmation message does not appear, you may have typed the new password differently
in steps 4 and 6. In this case, your new password did not take effect. Repeat this procedure,
making sure to type the same new password in steps 4 and 6.
It is recommended to change the password and keep the new password in a safe place for a
secured management.
4.3.1.4 Changing the Guest Password
To change the guest password:
1. Use the Down Arrow key to highlight guest Password and press the Enter key. The Enter New
Password screen appears.