Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 203)

- 195 -
4. Use the Down Arrow key to highlight IP Address, then press Enter. When the Enter IP Address
screen appears, type the IP address from where the file will be obtained. The address consists of
numbers separated by periods. For example: 203.70.249.53
5. Press Enter. The IP address appears next to IP Address.
6. When you finish, press the Esc key. A prompt asks whether you want to transfer the file now.
F IGURE 5-184
7. Highlight Yes and press Enter to transfer the file now, or press the Esc key or highlight No and
press Enter to not transfer the file at this time.
5.16.3 Receiving Files via Kermit
To receive files using the Kermit protocol:
1. From the File Transfer screen, highlight Receive File Via Kermit and press the Enter key. A
prompt asks whether you want to transfer the file now.