9 viewing and/or changing snmp parameters – Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A User Manual
Page 257

- 249 -
7.9 Viewing and/or Changing SNMP Parameters
To view and/or change all SNMP-related information, point to Advanced Setup and click SNMP. The
SNMP parameters in Figure 7-44 appear.
F
IGURE
7-49
SNMP C
ONFIGURATION
P
ARAMETERS
1. For
SNMP
, indicate whether it is enabled or disabled.
2. For
Get Community Name
, type a get community name.
3. For
Set Community Name
, type a set community name.
4. Use the four Trap Community text boxes to specify up to four trap community names (one
community name per text box).
This manual is related to the following products: