Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 196)

- 188 -
Note: To enable Rate Control function, all the ports MUST NOT use profile with Delay Sensitive
Application enabled.
4. To change the port number setting, press the Down Arrow key to highlight Port Number, then
press Enter. The Port Number screen appears.
F IGURE 5-175
5. Highlight the desired port number, then press Enter. A screen showing the average rate and traffic
type settings for the selected port appears.
Note: Gigabit port does not support Rate Control function.