Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 20)

- 12 -
F IGURE 2-7 100B ASE -FX E XPANSION M ODULE
WGSW-C1ST Module Status LEDs WGSW-C1SC Module Status LEDs
T ABLE 2-11 100B ASE -FX MODULE S TATUS LED S
WGSW-C1SC / WGSW-C1ST
LED Color Function
100
Green
Lights to indicate that receiver of fibre port is in normal
optical input levels.
Act Green Lights to indicate that the connection is acting.
FDX/COL Yellow
Lights to indicate that the port is operating at full duplex.
Blinks orange periodically to indicate that the connection
is experiencing collisions.
2.4 Installing the Switch
The Switch is designed for office use, where it can be free standing, desktop-mounted, or mounted in
most standard 19-inch equipment racks. If you prefer, you can rack-mount the Switch in a wiring closet
or equipment room using two mounting brackets and six screws.
When choosing a location for the Switch, observe the following guidelines:
Make sure the Switch is accessible and that the cables can be connected easily.
Keep cabling away from sources of electrical noise such as radios, transmitters, and broadband
amplifiers as well as power lines and fluorescent lighting fixtures.
Prevent water or moisture from entering the Switch case.
Make sure there are no obstructions to restrict airflow around the Switch. We recommend that you
provide a minimum of 25 millimeter (1-inch) clearance.
Do not place liquids or other objects on top of the Switch.
If the Switches are freestanding, do not stack more than four switches on top of one another.