Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 201)

- 193 -
F IGURE 5-181
6. Highlight Yes and press Enter to transfer the file now, or press the Esc key or highlight No and
press Enter to not transfer the file at this time.
5.16.2 Sending Files via TFTP
The following procedure describes how to send files using the TFTP protocol.
Note: The TFTP protocol is used to download upgraded software to the Switch. A VLAN with the
proper IP address and routing path to the TFTP server must be configured for the Switch to
access the specified TFTP server.
1. On the File Transfer screen, highlight Send File Via TFTP and press the Enter key. The Send File
Via TFTP screen appears.