Powerware 9335 - Manual (Page 12)

xi Powerware 9335 (80 kVA and 120 kVA) Installation and Operation
164201396 REV. A 071103
Safety Considerations
The UPS cabinet is designed for industrial or computer room applications, and
contain safety shields behind the doors. However, the UPS system is a
sophisticated power system and should be handled with appropriate care, following
these guidelines:
•
Keep surroundings clean and free from excess moisture.
•
Do not operate the UPS system close to gas or electric heat sources.
•
The system is not intended for outdoor use.
•
The operating environment should be maintained within the parameters
stated in the manual.
•
Keep the cabinet doors closed and locked to ensure proper cooling
airflow and to protect personnel from dangerous voltages inside the unit.
•
The UPS system contains its own power source. Lethal voltages are
present even when the UPS is disconnected from utility power.
If service or routine maintenance is required:
•
Ensure all power is disconnected before performing installation or
service.
•
Ensure the area around the UPS system is clean and uncluttered.
•
Battery maintenance or battery replacement should be performed only by
authorized service personnel.
•
Observe all DANGER, CAUTION and WARNING notices affixed to the
inside and outside of the equipment.
Getting Help
If you need to schedule initial startup, need regional locations and telephone
numbers, have a question about any of the information in this manual, or have a
question this manual does not answer, please call Powerware Corporation at:
United States 1 – 800 – 843 – 9433
Canada 1 – 800 – 461 – 9166
Outside the U.S. Call your local representative
WARNING:
Only AUTHORIZED SERVICE PERSONNEL should perform maintenance
on or service the UPS system.