Promise Technology FastTrak SX Series Version 4.4 - Manual (Page 84)

Promise Array Management
80
Error Handling
This feature deals with a bad sector on a disk drive that the FastTrak Controller
encounters during a Rebuild. The options are:
Fix if possible – The Controller attempts to repair the disk error.
Skip – Bypasses the disk error and works around it.
Abort – Halts the Rebuild and sends an error message.
Stop, Pause, Continue
Promise recommends that you let your rebuild run to completion. If you need to
pause the process:
1. Right-click on the icon of the Array that is rebuilding and select Pause
from the popup menu.
2. To continue, right-click on the same icon again and select Resume from the
popup menu.