Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 55)

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 27
Chapter 2: Basic Checkout
Resetting The Hand-Held
2.6 Resetting The Hand-Held
Warm Reset
To execute a warm reset:
• Press and hold down the [BLUE] key and the [ENTER/ON] key simulta-
neously for a minimum of six seconds.
A warm reset closes open applications; any unsaved data are lost. Installed
programs and saved data are preserved.
Note: You do not need to reset your 7530 G2 after configuring the radio.
Cold Reset
There are two options when executing a cold reset: reset to BootLoader or reset
directly to Windows CE operating system.
To execute a cold reset and access the BooSt menu:
• Press and hold down the left [BLUE] key, the [ENTER] key and the
[SCAN] key simultaneously for a minimum of six seconds.
After a cold reset, the BooSt menu appears.
• If you want to load the Windows CE operating system, type 1.
• If you want a clean start, press ! (that is, the [SHIFT] key and 1). All data
and settings are lost. Files and data stored in flash are preserved.
Once the OS loads, any executables and cab files in the startup folders are run. The
cab files are deleted by the cab file installer unless they are marked read-only.