Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 206)

Chapter 5: Configuration
Decoded (Intermec ISCP)
178 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
5.11.4.6 EAN 8
Enabled
Set this parameter to on to enable “EAN 8”.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Convert To EAN 13
If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.
Prefix/Suffix
See “Prefix/Suffix” beginning on page 151.
5.11.4.7 UPC A
Enabled
Set this parameter to on to enable “UPC A” bar code scanning recognition.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded
bar code data.
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Prefix/Suffix
Refer to page 151 for details.
5.11.4.8 UPC E
Enabled
Set this parameter to on to enable “UPC E”.