Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 192)

Chapter 5: Configuration
Decoded (Internal) Scanners
164 Psion Teklogix 7530 G2 Hand-Held Computer User Manual
5.11.3.7 EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
Prefix/Suffix
See “Prefix/Suffix” beginning on page 151.
5.11.3.8 EAN 8
Enabled
Set this parameter to on to enable “EAN 8”.
EAN-8 Zero Extend
When this parameter is enabled, five leading zeros are added to decoded EAN-8
symbols, making them compatible in format to EAN-13 symbols. Disabling this
parameter returns EAN-8 symbols to their normal format.
Prefix/Suffix
See “Prefix/Suffix” beginning on page 151.
5.11.3.9 UPC A
Enabled
Set this parameter to on to enable “UPC A”.
UPC-A, Check Digit
If you enable this parameter, the check digit is included with the decoded bar
code data.
UPC-A, Preamble
When you double-tap on this parameter, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-A symbols transmitted to
the host device: System Char – system character transmitted with the data, Country
code and System Char – both the country code (“0” for USA) and system character
are transmitted with the data or None – no preamble is transmitted. The lead-in
characters are considered part of the symbol.