6 upc a, 7 upc e, 6 upc a 5.11.2.7 upc e – Psion Teklogix Hand-Held Computer 7530 G2 User Manual
Page 180: Addendum, Prefix/suffix, Enabled, Include number sys, Include check, Convert to upc-a
Chapter 5: Configuration
Non-Decoded Scanners
152
Psion Teklogix 7530 G2 Hand-Held Computer User Manual
Addendum
Important:
Before “Addendum” can take effect, the “Short Code” parameter
(see page 146) must be enabled.
Refer to “Addendum” on page 150.
Prefix/Suffix
See “Prefix/Suffix” beginning on page 151.
5.11.2.6 UPC A
Enabled
Set this parameter to on to enable “UPC A”.
Include Number Sys
If this parameter is enabled, the number system digit is included with the decoded
bar code data.
Include Check
If this parameter is enabled, the check digit will be included with the decoded bar
code data.
Addendum
Important:
Before “Addendum” can take effect, the “Short Code” parameter
(see page 146) must be enabled.
Refer to “Addendum” on page 150.
Prefix/Suffix
Refer to page 151 for details.
5.11.2.7 UPC E
Convert to UPC-A
Setting this parameter to
on
results in a non-standard decoding that returns 12 digits
from the 6 digit UPC E bar code.