Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 262)

6.12 Tether Adaptor Cables
The following standard tether cables are available for the external scanners:
• CA1010 JB5 to DE9 RS232 Serial Cable: Straight through wiring.
• CA1015 JB5 to DE9 RS232 Serial Cable: Null modem (signal lines are
crossed-over).
• CA1020 JB5 to Type B USB: Connects to USB devices with Type B
receptacles.
For the pinout diagrams for 7530 G2 USB cables PN CA1020 and PN CA1010,
refer to Appendix B: “Port Pinouts”, page B-3
Special intermediate cabling assemblies are available to allow older devices or
unique peripherals to be connected to the JB5 tether port. These cabling assemblies
permit scanner cables to be re-terminated in an intermediate in-line connector
(called LTW), which then interfaces to one of a number of standard adaptor cables
with JB5 terminations.
These kits include assembly instructions and include the mating connector.
• 1002162 Cable Adaptor LTW - JB5 Scan Decoded.
• 1002163 Cable Adaptor LTW - JB5 Scan Undecoded.
• 1002164 Cable Adaptor LTW - JB5 Scan RS-232.
• 1002165 Cable Adaptor LTW - JB5 Scan RFID.
• 1002166 Cable Adaptor LTW - JB5 Scan USB.
Contact Psion Teklogix support services (see Appendix A: “Support Services And
Worldwide Offices”) for assistance in the creation of these cable assemblies if you
wish to take advantage of this capability.