3 trap destination tab, 1 enabling authentication traps, 2 adding a destination – Psion Teklogix Hand-Held Computer 7530 G2 User Manual
Page 236
Chapter 5: Configuration
Trap Destination Tab
208
Psion Teklogix 7530 G2 Hand-Held Computer User Manual
5.12.3 Trap Destination Tab
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running
on the managed node. This option allows you to define where the report will be sent.
5.12.3.1 Enabling Authentication TRAPS
Enabling Enable Authentication TRAPS allows authorization traps to be sent when
a failure is detected (e.g., an SNMP message received with a bad community name).
5.12.3.2 Adding A Destination
To add a new destination:
•
Tap on the Add button.
•
Type a destination in the text box provided, and press [ENTER].