Psion Teklogix Hand-Held Computer 7530 G2 - Manual (Page 229)

Psion Teklogix 7530 G2 Hand-Held Computer User Manual 201
Chapter 5: Configuration
Ports
Parity
This parameter determines the type of parity checking used on the data going
through the tether port. Double-tapping on this option displays a pop-up window in
which you can choose the appropriate Parity.
Stop Bits
This parameter specifies the number of stop bits – 1, 1.5 or 2 – used for asynchro-
nous communication.
5.11.8.2 Console Port (COM3)
Note: The console port is accessed via the docking connector on the bottom of
the 7530 G2. Only the Portable Docking Module (PDM) provides access
to the console port through a DE-9 interface.
Enabled
This parameter must be set to on in order for the 7530 G2 to recognize the device
connected to the console port.
Baud
Refer to page 200 for details.