Setting up a job (continued) – Pitney Bowes ADDRESSRIGHT DA700 User Manual
Page 47
3-19
SV61027 Rev. D
DA700/DA750 Features and Adjustments • 3
Adjust the exit rollers so they overlap the left and right edges
of the material by 1/4". Rotate the release lever to vertical
then slide the rollers from side to side to make the adjust-
ment and press the lever down to lock. Must be down and
latched to operate.
8. Adjust the Exit Rollers
Setting
Up A Job
(continued)
IMPORTANT: Make sure the rollers do not touch any
printed area of the material. If this happens, the rollers
will act like a printing press and imprint a faint impression
at incremental distances on the material. If this happens,
move the roller or rollers toward the nearest clear zone,
that is, an area free of printing.
Exit Roller
Release Lever
Exit Slide Rollers (in
jam-clearing position)