Pitney Bowes ADDRESSRIGHT DA700 - Manual (Page 108)

A-24 SV61027 Rev. D
Appendix A • Control Panel Menus
3. Purge Print
Head
The purging process clears any clogged ink on the print noz-
zle. Often this will return the print quality to a normal level. To
select this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until the Purge Test Head option appears
on the LCD panel.
2. Press the Enter button to select this option.
3. To select Purge Print Head cycle, press Enter when the
“Purge Print Head?” message displays.
This option can be enabled by pressing the
+ button (YES) or disabled by pressing the
– button (NO). If enabled, the printer will display “Please
wait...Ink Jets being purged”.
4. Press the Menu button to back out of the menu until the
printer displays OFF LINE. Then press the ON LINE but-
ton to enable the printer.
2. Test Print
Head
(continued)
3. Press + for Yes to print the test pattern, or press – for
No to cancel. If you press +, “Please wait...Test patern
is printing” displays. The printer prints a diagonal line
across the material. If a gap is present within the di-
agonal line, the nozzle may be blocked and need to be
cleaned.
4. Press the Menu button to back out of the menu until the
printer displays OFF LINE. Then press the ON LINE
button to enable the printer.