Pitney Bowes ADDRESSRIGHT DA700 - Manual (Page 46)

3-18 SV61027 Rev. D
3 • DA700/DA750 Features and Adjustments
A Note about Print Quality
The DA700/DA750 is designed to feed and print on a range
of materials with various finishes and coatings. However
the sharpness of the print may vary with different materials,
depending on how absorbent the surface is, as well as other
qualities.
You'll get best results using white wove bonded stock. Print-
ing is less sharp on Tyvek, recycled and glossy material. It is
also possible that ink may not dry thoroughly on certain very
glossy materials.
Always test high gloss materials for their drying qualities be-
fore you buy them in quantity and attempt to run a print job.
A dryer may be needed for high gloss material.
Setting
Up A Job
(continued)