Pitney Bowes ADDRESSRIGHT DA700 - Manual (Page 101)

A-17 SV61027 Rev. D
Control Panel Menus • Appendix A
5. Address
Recovery
Use this option to direct the printer’s memory to go back a
certain number of addresses when an error occurs in order
to reprint the address. The options on this menu are:
A. Get Addresses
B. Clear Memory.
A. Get Addresses
Select Get Addresses after a jam is cleared and you want
to restart printing at the point where the printer left off just
before the jam occurred. To retrieve any address in the data
buffer, press the Enter button. The first 16 characters of the
first line of the last address printed will be displayed on the
LCD. Press the + or – buttons to scroll through the address-
es. When the desired address appears, press the Enter but-
ton to print that address plus the remaining addresses in the
buffer.
NOTE: If you are using the Windows NT operating system,
only cryptic characters will appear.
B. Clear Memory
Clear Memory should be selected before you start a new
batch printing. This is required since the memory will contain
up to twenty addresses from the previous batch.
To use this menu option:
1. Press the + or – buttons to scroll through the Main Menu
options until the Address Recovery option appears on
the LCD panel.