Pitney Bowes ADDRESSRIGHT DA700 - Manual (Page 126)

B-6 SV61027 Rev. D
Appendix B • DA700/DA750 Specifications
Throughput (Refer to the chart on page 3-3)
Fourteen thousand (14,000) pieces per hour, depending on
print mode, media size, number of address lines, and bar-
code imprinting. The following throughput specifications are
based on 18 characters per line, 10 point, three lines per ad-
dress, and no barcode (color cartridge removed).
Destination Address Throughput
Three lines, 18 characters per line, no barcode, margin five
inch (12.7 cm), black only, color print cartridge removed.
(Refer to chart on page 3-3.)
Draft Letter Executive
14,000 13,000 11,000
NOTE: Graphics affect throughput speed.
Stacker Capacity
• Input Stacker: 600 #10 Envelopes with Bin
extension, or 250 without extension in-
stalled.
• Output Stacker: 150 #10 Envelopes
FIM (Facing Identification Mark)
The printer is capable of printing an approved FIM barcode
to the defined standards. FIM is used to “face” first class
mail with certain types of IBI (information-based indicia) mail.
NOTE: Pitney Bowes Envelope DesignerTM Plus software
does not support the creation of FIM barcode.
Equipment
Specifications
(continued)