Patton electronic CopperLink 2160 Series - Manual (Page 96)

Exit Command 96
Model 2160 Series Getting Started Guide 5 • Console and Telnet configuration
Exit Command
To log out of the system without saving your changes, move the cursor “ >>” to exit in the main menu and
press Enter.
-------------------------------------------------------------------------
Command: exit
Message: Please input the following information.
Do you want to disconnect? (y/n): y
-------------------------------------------------------------------------
Press “y” to exit the system. A confirmation screen displays:
------------------------------------------------------------------
Connection closed...
Press SPACE key to enter console mode configuration!
------------------------------------------------------------------
enable Modify command privilege
setup Configure system
status Show running system status
show View system configuration
write Update flash configuration
reboot Reset and boot system
ping Packet internet groper command
admin Setup management features
utility TFTP upgrade utility
>> exit Quit system