Patton electronic CopperLink 2160 Series - Manual (Page 86)

Setup Command Menu 86
Model 2160 Series Getting Started Guide 5 • Console and Telnet configuration
DNS Proxy
The dns_proxy command allows you to set up three DNS servers for the Model 2160. Move the cursor “ >>”
to dns_proxy in the setup menu and press Enter.
----------------------------------------------------------------------
Command: setup dns_proxy [IP] [IP]
Message: Please input the following information.
DNS server 1 (ENTER for default) <168.95.1.1>: 10.0.10.1
DNS server 2: 10.10.10.1
DNS server 3:
----------------------------------------------------------------------
Host Name
A Host Name is a unique name that attaches a host to a network. The hostname is used to identify a particular
host in various forms of electronic communication. Some ISP providers require the Host Name as identifica-
tion. You may check with your ISP to see if your Internet service has been configured with a host name. In
most cases, you can ignore this field.
Move the cursor “ >>” to hostname in the setup menu and press Enter. The host name cannot use spaces and
cannot have more than 15 characters.
----------------------------------------------------------------------
Command: setup hostname
Message: Please input the following information.
Local hostname (ENTER for default) : test
----------------------------------------------------------------------
Factory Default
If you want to restore factory default settings for the Model 2160, move the cursor “ >>” to default in the
setup menu and press Enter.
----------------------------------------------------------------------
Command: setup default
Message: Please input the following information.
Are you sure? (Y/N): y
----------------------------------------------------------------------