Patton electronic CopperLink 2160 Series - Manual (Page 87)

Status Command Menu 87
Model 2160 Series Getting Started Guide 5 • Console and Telnet configuration
Status Command Menu
The status command menu lists commands for viewing the system status of interfaces on the Model 2160.
Move the cursor “ >>” to status in the main menu and press Enter.
When you enter the status command, the following menu displays:
LINE Status
The LINE command shows the status of the Line port. Move the cursor “ >>” to LINE in the status menu and
press Enter. The LINE status includes mode, line rate, SNR margin, attenuation, and CRC error count of the
local side Ethernet Extender, and SNR margin, attenuation and CRC error count of the remote side Ethernet
Extender.
Figure 51. LINE Status
Interface Status
To view the status of the MGMT interface, move the cursor “ >>” to interface in the status menu and press
Enter.
Figure 52. Interface Status
>> LINE Show LINE status
interface Show interface statistics status
Table 32. Status Command Menu
Command Description
LINE The LINE status includes mode, line rate, SNR margin, attenuation, and CRC error count of
the local side modem, and SNR margin, attenuation and CRC error count of remote side
modem. The modem can access remote side information via EOC (embedded operation
channel).
interface Use the interface command to view the statistic status of the MGMT interface.