Paradyne COMSPHERE 3615 - Manual (Page 134)

Index
Index-9 3615-A2-GB20-20 December 1996
standard features, 1-1
Standby, DBM message, C-4, C-9
Standby mode, 4-8
Starting Up DBM message, C-9
Stat, 4-4
Status
branch, 4-4, A-4
DTE, 4-5
indicators, C-1
DSU, C-2
SDCP, C-3
Stndby message, C-8
Stop Bits, DBM Port option set, 5-15
storage temperature, 1-4
Stream message, C-8
Streaming Terminal alarm, C-2
StreamTerm, DSU or DBM message, C-6
Subn, 4-5
Subnetwork Alarm, C-2
Subnetwork Health and Status, 4-5
messages, C-8
SubnetwrkAlarm message, C-6
SubSpd message, C-8
Subtree Truncat message, C-6
support, equipment, 1-8
switch
locations, Model 3616, 3-3
settings
Model 3615, 2-3
Model 3616, 3-3
Switched 56 DBM, 1-3
2-wire, technical specifications, 1-8
4-wire, technical specifications, 1-7
56 kbps, network interface
2-wire, 1-8
4-wire, 1-7
network interface, 1-6
Switched 56 kbps, network connection, 2-7, 3-8
SyBC, 2-5, 4-13
application
dial backup for received data errors, E-2
exceeded load thresholds, E-3
area, 5-1
SyBT, 2-5, 4-13
application
dial backup for received data errors, E-2
exceeded load thresholds, E-3
area, 5-1
SystemStat, DSU Port option set, 5-8
T
technical specifications, 1-3
2-Wire Switched 56 DBM, 1-8
4-Wire Switched 56 DBM, 1-7
DSU, 1-5
general, 1-4
V.32 DBM, 1-6
telephone number, entering, 4-17
temperature
operating, 1-4
storage, 1-4
terminal power, 4-7
Test, 4-9
Bilateral Loopback, 2-12, 3-12
Bit Error Rate, 2-12, 3-12, 4-12
Branch, 4-9
branch, A-4
Device, 2-12, 3-12, 4-9
Digital, 2-12, 3-12, 4-11
Digital Loopback, 2-12, 3-12
DTE Loopback, 2-12, 3-12
End-to-End, 2-12, 3-12, 4-11
Lamp, 2-12, 3-12, 4-13
Local Loopback, 2-12, 3-12
message, C-8
mode
DBM test message, C-4
DSU test message, C-5
Remote Digital Loopback, 2-12, 3-12
status indicator, C-2
SDCP, C-3
testing connections, 2-10, 3-11
tests, 2-12, 3-12
Thresh message, C-8
TM
DBM test, C-4
DSU test, C-5
top-level menu, 2-5, 3-11, 4-4, A-1
TPwr, 4-7
traffic loading, E-3
Training failure message, C-7
transmit VF interface, 1-6
transmitter control, 4-19
TribTm message, C-8
tributary
addressing, 2-10, 3-10
diagnostics, 1-2, 1-3
Tries Timer message, C-7
TriesTimeOut, 4-8
Backup option set, 5-19
Trunc message, C-8
TxClkSource
DBM option set, 5-10
DSU option set, 5-6
TxCtl, 4-19
TXD, status indicator, C-2
TxPwd, DBM option set, 5-11