Pride Mobility ACN# 088 609 661 - Manual (Page 4)

4 Basic Operation Instructions
Synergy Seat www.pridemobility.com
Indicates that this product conforms to the ANSI/RESNA
WC/Vol. 4, Section 19/ISO 7176-19 standards for transport
of an occupied power chair in a motor vehicle. If this label
is not found on this power chair or on the seating system,
this indicates that this product is not approved for use as a
seat in a motor vehicle. In this case, the power chair
occupant must transfer into one of the motor vehicle seats
equipped with approved safety belt.
Indicates power chair securement points.
Consult your Quantum Rehab Provider
before making any changes to your
seating system configuration.
PRODUCT SAFETY SYMBOLS
The symbols below are used on the seating system to identify warnings,
mandatory actions, and prohibited actions. It is very important for you to
read and understand them completely.
LABEL INFORMATION
Read and follow the information in the owner’s manual.
Avoid exposure to rain, snow, ice, salt, or standing water
whenever possible. Maintain and store in a clean and dry
condition.
EMI-RFI — This product has been tested and passed at an
immunity level of 20 V/m.
Use correct tie-down points for controller harness to
prevent the harness from getting caught in the drive tires
or pinched in the seat frame.
Maximum seating weight.
Crush/pinch point.