Pride Mobility ACN# 088 609 661 - Manual (Page 35)

Basic Operation Instructions 35
www.pridemobility.com Synergy Seat
POWER SEAT ELEVATOR OPTION
The power seat elevator provides lift of up to 7 in. (17.78 cm) from the
power base using a single post plate and actuator. See figure 32. The max-
imum weight capacity of the power seat elevator is 300 lbs. (136 kg) and is
available on some models. Contact your Quantum Rehab Provider for spe-
cific information. The power seat elevator operates through the power chair
controller or toggle switch.
NOTE: Operation instructions using the joystick 4-way toggles are dis-
cussed below. If you are using a different toggle, the Attendant Control
Module, or a different operating device, please refer to the appropriate
section of this manual or the operation manual supplied with that device
and/or your power chair owner’s manual.
To operate the power seat elevator:
1. Pull the toggle switch backward to elevate the seat.
2. Push the toggle switch forward to lower the seat.
Figure 32. Power Seat Elevator Option on a Synergy Seat
PROHIBITED! Avoid exposure to rain, snow, ice, salt, or
standing water whenever possible. Maintain and store in a
clean and dry condition.