Pride Mobility ACN# 088 609 661 - Manual (Page 37)

Basic Operation Instructions 37
www.pridemobility.com Synergy Seat
SYNERGY MANUAL TILT OPTION
If your power chair includes the Synergy Manual Tilt Option, you can
position the seat to angles ranging from 0°-45°, in almost infinite
increments.
To tilt the seat:
1. Remove the detent pin from the tilt release lever. See figure 35.
2. Squeeze the tilt release lever and tilt the seat.
3. Release the tilt release lever when the seat is in a comfortable position.
NOTE: The tilt release lever may be mounted onto either back cane.
WARNING! When the seat is tilted 20° or more, an inhibit
switch will cut power to the motors of your power chair.
Returning the seat to an angle of less than 20° will restore
power to the motors.
Figure 34. Manual Recline Angle Adjustment