Pride Mobility ACN# 088 609 661 - Manual (Page 24)

24 Basic Operation Instructions
Synergy Seat www.pridemobility.com
2. Turn the adjustable dial clockwise to change the angle of the armrest.
See figure 15. The armrest is at 0° when it sits on the white dot of the
adjustable dial. From 0°, the angle can be decreased to -30° or increased
to 30° in 5° increments. The adjustable dial moves only in the clockwise
direction.
3. Move the armrest down into position.
4. Repeat for the other armrest, if necessary.
To adjust the height of the armrests attached to the push bar:
1. Loosen the two bolts on each armrest bracket. See figure 16.
2. Slide both armrests at the same time to the desired height.
3. Tighten the bolts on each armrest bracket.
To adjust the height of armrests not attached to the push bar:
1. Loosen the two bolts on the armrest bracket. See figure 17.
2. Slide the armrest to the desired height.
3. Tighten the two bolts.
4. Repeat for the other armrest, if necessary.
NOTE: The parts to change a non-push bar mount to a push bar mount
are included in the owner’s package.
BOLTS
BOLTS
Figure 16. Height Adjustment for
Cantilever Armrests Attached to the
Push Bar Figure 17. Height Adjustment for
Cantilever Armrests Not Attached to
the Push Bar