Pride Mobility ACN# 088 609 661 - Manual (Page 29)

Basic Operation Instructions 29
www.pridemobility.com Synergy Seat
Unlocked Postion
Locked Postion
Figure 24. Single Post Quick Height
Adjustable Armrest Top Height
Adjustment
Release
Lever
Locking Pin
Single Post Quick Height Adjustable Drop-In Armrests
The Single Post Quick Height Adjustable Drop-In Armrests are removable
like the Heavy Duty Drop-In Armrests and are available in both adult and
pediatric sizes.
Figure 23. Single Post Quick Height
Adjustable Armrest Removal/
Installation
To remove the armrest assembly:
1. Rotate the armrest lock lever
forward. See figure 23.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into
the armrest lock. See figure 23.
2. Rotate the armrest lock lever
rearward.
Adult size armrest height adjust-
ments can be made on both the top
and the bottom of the armrest. The
total height adjustment range is 6
in. (15.24 cm) from 11–17 in.
(27.94–43.18 cm). This range is
measured from the seat pan to the
top of the armrest pad.
Top height adjustments do not
require any tools. The top height
adjustment range is 3 in. (7.62 cm)
in 3/8-in. (0.95-cm) increments.
The bottom height adjustment
range is 3 in. (7.62 cm) in 1-in.
(2.54-cm) increments.
To adjust the top height:
1. If present, remove the optional
locking pin. See figure 24.
2. Pull the armrest up to raise, or
press the release lever to lower
the armrest to the desired height.
3. If applicable, reinsert the lock-
ing pin.
4. Repeat for the other armrest, if
necessary.