Pride Mobility ACN# 088 609 661 - Manual (Page 20)

20 Basic Operation Instructions
Synergy Seat www.pridemobility.com
„ Seat Elevator Function (Optional)
1. Press the power key to power on the module.
2. Press the mode key until the seat profile is active and then push the joy-
stick to the right until the actuator in the seat is illuminated on the actu-
ator indicator on the module. Pull the joystick backward to increase the
height of the seat.
3. To lower the seat while in seat profile indicated in step 2, push the joy-
stick forward to decrease the height of the seat.
„ Leg Rest Function (Optional)
1. Press the power key to power on the module.
2. Press the mode key until the seat profile is active and then push the joy-
stick to the right until the actuator in the desired leg rest is illuminated
on the actuator indicator on the module. Pull the joystick backward to
raise the leg rest.
3. To lower the leg rest while in seat profile indicated in step 2, push the
joystick forward to decrease the height of the leg rest.
„ Independent/Combined Leg Rest Function (Optional)
1. Press the power key to power on the module.
2. Press the mode key until the seat profile is active and then push the joy-
stick to the right until the actuator(s) in the left, right, or combined leg
rest is illuminated on the actuator indicator on the module. Pull the joy-
stick backward to raise the leg rest(s).
3. To lower the leg rest(s) while in seat profile indicated in step 2, push the
joystick forward to decrease the height of the leg rest(s).
Remote Plus Joystick Operation
1. Press the On/Off Key to power on the chair and the controller.
2. Press the Mode Key twice to select actuator adjustment mode.
3. Push the joystick to the right to cycle through the available actuators until
the desired light is illuminated on the actuator indicator. See figure 13.
4. Push the joystick forward to raise the actuator or backward to lower it.
5. Press the Mode Key again to return to the drive mode.