Polaris Magnum 330 - Manual (Page 98)

95
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Front Gearcase Oil Change
Centralized Hilliard
1. Check the vent hose (1) to be sure
it’s unobstructed and routed
properly.
2. Support the vehicle securely with
a jackstand and remove the front
tire on the driver’s side.
3. Remove the drain plug (2) located
on the bottom of the gearcase and
drain the oil into a suitable
container. The drain plug is
accessible through the skid plate.
Discard used oil properly.
4. Clean and reinstall drain plug using a new sealing washer. Torque
to 14 ft. lbs. (19 Nm).
5. Remove the fill plug (3) and add 5oz. (148 ml) of the
recommended fluid. DO NOT OVERFILL. Overfilling may cause
excess drag, which can lead to unwanted engagement.
6. Reinstall the fill plug and torque to 14 ft. lbs. (19 Nm).
Visco-Lok
1. Position the vehicle on a level surface and remove the fill plug.
2. Place a drain pan beneath the gearcase, remove the gearcase drain
plug, and drain the oil.
3. Clean and reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
4. Add 13.5 oz. (140 ml) of the recommended fluid.
5. Reinstall the fill plug and check for leaks.
1
2
3