Polaris Magnum 330 - Manual (Page 94)

91
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Oil and Filter Change (Magnum 330)
11. Lubricate the gasket on the new filter with a film of engine oil.
Check to make sure the gasket is in good condition.
12. Install the new filter and turn by hand until the filter gasket
contacts the sealing surface, then turn and additional 1/2 turn.
13. Remove the dipstick and fill the sump with the recommended oil.
Refer to the specifications section beginning on page 131 for
capacities.
14. Place the gear selector in PARK and lock the parking brake.
15. Start the engine and let it idle for one to two minutes. Stop the
engine and inspect for leaks.
16. Recheck the oil level and add oil as necessary to bring the level to
the upper mark on the dipstick.
17. Dispose of used filter and oil properly.